How Long Should Diesel Generator Oil Be Changed?
Blog, Diesel Generator Maintenance 01/09/2025
Diesel Generator Oil: Its Role and Recommended Change Intervals

How Long Should Diesel Generator Oil Be Changed?
Different diesel generator manufacturers and generators with varying power outputs use different types of oil.
(1) The first oil change for a new diesel generator set should be performed promptly after the 60-hour break-in period.
(2) Under normal operating conditions, the oil should be changed every 200-250 hours of operation. If the operating conditions are favorable, the interval can be extended to 300-350 hours. The oil should be drained when the generator set is hot, such as immediately after stopping the engine.
What Type of Oil is Best for Diesel Generator?
The lubricating oil used in diesel generator sets should be selected according to the CF grade specified in GB11122. For users in non-cold regions, 40-grade oil can be used in any season, which is beneficial for improving the lubrication conditions of the diesel generator set, reducing wear on components, and extending the service life of the unit. For users in cold regions, special low pour-point thickened oils should be selected. The recommended grades are as follows:
- When the minimum ambient temperature is -15°C, 20W-40 oil should be used.
- When the minimum ambient temperature is -20°C, 15W-40 oil should be used.
- When the minimum ambient temperature is -25°C, 10W-40 oil should be used.
- When the minimum ambient temperature is -30°C, 5W-40 oil should be used.
- When the minimum ambient temperature is -35°C, 0W-40 oil should be used.
Functions of Diesel Generator Engine Oil

1. Sealing and Leak Prevention
Engine oil forms a seal between the piston rings and the piston to minimize gas leakage and prevent external contaminants from entering the system.
2. Rust and Corrosion Protection
Lubricating oil adheres to the surface of components to protect them from water, air, acidic substances, and harmful gases, preventing rust and corrosion.
3. Lubrication and Wear Reduction
There is rapid relative motion between components, such as the piston and cylinder or the crankshaft and bearing bush. To prevent excessive wear, an oil film is required between the sliding surfaces. A sufficiently thick oil film separates the sliding surfaces, reducing friction and wear.
4. Cleaning
High-quality engine oil carries away carbon deposits, sludge, and worn metal particles from engine components back to the oil tank. It also flushes dirt generated on the working surfaces of components through the flow of lubricating oil.
We are a leading diesel generator manufacturer, also offering a wide range of generator parts compatible with various generator models. Whether you need a complete generator set or specific components, we are here to provide high-quality products tailored to your needs. Feel free to contact us for inquiries or additional information.
Factory Direct Sales in China
Related Article


